Charles Okonski

Design EO/IR sensor systems and imaging systems for submarines, surface ships, combat vehicles, and other defense platforms. Perform requirements flow down, requirements verification and validation, and requirements decomposition. Write test methods, test procedures, and test reports.

Perform requirements flow down, requirements verification, and validation, requirements decomposition. Write test methods, test procedures, and test reports for high power contactors and relays.

Write DFMEA, Fault Tree Analysis, ESS, HALT plans and procedures for Boeing and Airbus Galley equipment (chillers, trash compactor). Perform associated testing and document results in final reports. Analyze results and report accordingly. Working knowledge of Reliasoft Reliability Software Suite.

Reliability: Write DFMEA, Fault Tree Analysis, ESS, HALT plans and procedures for Boeing and Airbus Galley equipment (chillers, trash compactor). Perform associated testing and document results in final reports. Analyze results and report accordingly. Working knowledge of Reliasoft Reliability Software Suite.

Ensure IQ, OQ, PQ, PPQ, DHF, DMR, CMF, Design Transfer, Validation Strategy, Project Classification, Design Input, Design Output, Sampling Methods, Test Method Validation, and Manufacturing Instructions meet QMS, ISO 13485, 21 CFR 820, and FDA regulatory guidelines/requirements. Initiated changes to SOPs to increase accuracy and reduction in ambiguity. Facilitated improvements to process changes t

Rockwell Collins, Irvine, CA: Boeing 777X Modular Control Stand integration. Wrote ATPs against Boeing requirements for Speedbrake and Stabilizer, Flap Control Module, Alternate Flap Control Module, Parking Brake and Alternate, Trim Control Module, Thrust Control Module.
DRS Aerospace Cypress, CA: Analyzed, decomposed, flowed down, and created requirements for infrared detection, laser detection,

Define requirements and integrate Flight Control Systems actuation and electronics controllers in order to meet requirements provided by the customer, meet business objectives, and achieve system certification on three FAR25 commercial aircraft families. Negotiate design requirements with the end customer (aircraft manufacturer). Create and manage requirements using DOORS database following Requir

Portable Aircraft Test Station: Responsible for ALL facets of design, test, customer interface, procurement, inspection, conformal coating, shipping and receiving, redesign due to thermal faults, DMS, and production schedule of personnel, resources, outsourcing (EMI, Conformal coating), and materials. Conducted failure analysis on power board “freezing” OFF at -60F in thermal chamber. Resulted in

Responsible for ALL facets of design, test, customer interface, procurement, inspection, conformal coating, shipping and receiving, redesign due to thermal faults, DMS, and production schedule of personnel, resources, outsourcing (EMI, Conformal coating), and materials. Conducted failure analysis on power board “freezing” OFF at -60F in thermal chamber. Resulted in design change to incorporate low

Satellite Infrared Sensors Systems Test. Performed analysis in support of the Global Hawk (GH) Enhanced Integrated Sensors Suite (EISS) Environmental Stress Screening test plan for the Receiver/Exciter/Controller (REC), Integrated Signal Processor (ISP), Sensor Electronics Unit (SEU), and Synthetic Aperture Radar (SAR) Line Replaceable Units (LRU. Accomplishments include: Produced a GH EISS Specia

Satellite Infrared Sensors Systems Test. Performed analysis in support of the Global Hawk (GH) Enhanced Integrated Sensors Suite (EISS) Environmental Stress Screening test plan for the Receiver/Exciter/Controller (REC), Integrated Signal Processor (ISP), Sensor Electronics Unit (SEU), and Synthetic Aperture Radar (SAR) Line Replaceable Units (LRU. Accomplishments include: Produced a GH EISS Specia

Managed the verification of BMDS system level requirements traced with element requirements and provided technical recommendations to include or delete 141 System / Element traces.
Served as DOORS and System Architect on site focal and mentored three engineers using DOORS.
Updated and maintained BMDS System Level Requirements database including designing and implementing process improvements and

Decomposed and allocated customer requirements to the Northrop Grumman cockpit hardware and software solution using DOORS, UML, and SLATE systems engineering tools.
Transformed DOORS database of Integrated Navigation, Controls, and Displays (INCDS) requirements into SLATE representation. Decomposed and allocated System Level (E2-D) requirements to component Integrated Navigation Controls and Displ

Authored numerous space activation, Failure Detection, Isolation Recovery (FDIR), Failure Mode, Effects, and Criticality Analysis (FMECA) and checkout procedures for Space Station Electrical Power System.
Performed extensive EPS and EPS subsystem testing including EPS space electronics cycling through solar charging and insolation battery discharging at the Space Station Test Facility Kennedy Spa

Produced F-14D Flight Test Scenarios for radar and IR sensors. Analyzed flight test data to evaluate radar and IR sensor performance against ECM.

Produced F-14D Flight Test Scenarios for radar and IR sensors. Analyzed flight test data to evaluate radar and IR sensor performance against ECM.

Performed F-14A System Integration of various avionics and weapon subsystems.

BSEE