Looking for a job

Aryan Goyal

@aryangoyal1

Message

I build low-power RTOS firmware and wireless communication stacks for ARM Cortex-M smart-metering products.

India

Message

What I'm looking for

I'm open to international relocation and travel for firmware roles focused on RTOS-based embedded systems, wireless protocol stacks, low-power design, and end-to-end validation. I require employer visa sponsorship.

At Landis+Gyr, I build RTOS-based communication-stack firmware for ultrasonic gas metering products on TI SimpleLink CC13xx ARM Cortex-M wireless SoCs.

I develop Embedded C/C++ across PHY, MAC, and application layers, including Wi-SUN and Mesh-IP routing, packet forwarding, retransmission, and fault recovery. My protocol and memory optimisations increased network throughput by 35%, reduced latency by 20%, and achieved approximately 5 µA sleep current.

I also lead Python and Robot Framework validation automation, unifying hardware and software interfaces into a platform that cut manual testing by 80%, improved fault-detection accuracy by 30%, and tested 10 devices in parallel.

Experience

Work history, roles, and key accomplishments

Current

Firmware Development Engineer

Current

Landis+Gyr

Aug 2023 - Present (3 years 1 month)

Developed RTOS-based communication stack firmware for TI CC13xx ARM Cortex-M wireless SoCs, optimizing protocol stack to increase network throughput by 35% and reduce latency by 20%. Led automation framework development that cut validation time by 80% and improved test throughput 5x.