Looking for a job

satwik User

@satwikuser2

Hardware and Embedded Software Engineer Intern at AION Health Solutions, developing a neonatal weighing device with custom ESP32-S3 hardware and firmware.

India

Message

What I'm looking for

I'm available for full-time work from January to July 2027.

At AION Health Solutions Pvt Ltd, I'm developing a non-invasive neonatal weighing device with a fabricated ESP32-S3 PCB, sensor interfaces, and motor and valve control.

I developed Embedded C/C++ state-machine firmware with three-point calibration, fault handling, automatic retries, and an emergency-stop interrupt. I also used an oscilloscope for hardware debugging and coordinated integration across mechanical, electronics, sensing, actuator, and firmware work.

On AES FPGA projects, I built Verilog RTL modules for a 14-round AES-256 encryption pipeline and developed AES-128 and Trivium accelerators with UART host control. I tested the designs in Vivado simulation against reference vectors.

At Team Cryptonite, MIT Manipal, I led operations for a 55-member organization, overseeing budgeting, procurement, logistics, and recruitment. I also contributed to embedded-systems and hardware-security work, including national electronics and hardware CTF competitions.

Experience

Work history, roles, and key accomplishments

Current

Hardware and Embedded Software Engineer Intern

Current

AION Health Solutions Pvt Ltd

Jun 2026 - Present (5 months)

Engineered a non-invasive neonatal weighing device with a fabricated ESP32-S3 PCB, NAU7802 24-bit ADC, pneumatic air bladder, motor and valve control, power latch, sensor interfaces, and status indicators. Developed Embedded C/C++ state-machine firmware with three-point calibration, 12-code fault handling, automatic retries, and an H0 emergency-stop interrupt; used an oscilloscope for hardware deb

Embedded C C++ESP32 S3 NAU7802 PCB Design Firmware Development State Machines Calibration Error Handling Oscilloscope and DMM Debugging Sensor Integration Actuators Medical Device Development

Social Media, Graphic Design, and Branding Lead

Revels 2026 and TechTatva 2025, MIT Manipal

Led campaign schedules and creative teams; designed official event T-shirts worn by 5,000+ participants and managed Instagram channels with 20,000+ cumulative followers.

Social Media Management Graphic Design Branding Campaign Management Canva Photoshop

Team Manager and Board Member

Team Cryptonite, MIT Manipal

Led operations for a 55-member organization ranked number 2 among academic cybersecurity teams in India; managed an approximately INR 9 lakh annual budget and secured an INR 1 lakh sponsorship from IIT Bombay Trust Lab. Oversaw procurement, vendors, travel, subscriptions, competition funding, reimbursements, detailed Excel records, policies, recruitment, onboarding, and coordination with faculty,

Budgeting Procurement Vendor Management Logistics Sponsorship Policy Development Recruitment Onboarding Stakeholder Management Excel Operations Management

Education

Degrees, certifications, and relevant coursework

Manipal Institute of Technology, Manipal Academy of Higher Education

B.Tech, Electronics and Instrumentation Engineering

2023 -

Pursuing a B.Tech in Electronics and Instrumentation Engineering with expected graduation in May 2027. Currently enrolled in a QNX-affiliated course under the QNX Everywhere ecosystem.