Skip to main content
hamzaali malikHM
Looking for a job

hamzaali malik

@hamzaalimalik

Mechanical Engineer at NESPAK supporting HVAC rehabilitation and VRF commissioning, with a fertilizer-spray controller project that reduced fertilizer loss by 10%.

Germany
Message

At NESPAK, I’m assisting with the rehabilitation and commissioning of chiller-based HVAC systems at Pakistan Sports Board (Liaquat Gymnasium), and supporting installation and testing of VRF systems at PEC building. I’ve also reviewed mechanical drawings, HVAC layouts, and BOQs under supervision.

At SATELLITE CONTROL AND AUTOMATION SERVICES, I supported HVAC design for a KRL hospital, including load calculations, layouts, and equipment selection. I also assisted with installation activities and site supervision.

For my fertilizer-spray controller project, I used MATLAB and Simulink to design and optimize a PID controller, and SolidWorks and ANSYS to design and analyze a field vehicle. The project reports a 10% reduction in fertilizer loss and a 15% increase in crop yield.

I also completed advanced CFD training at NASTP, covering aerospace and automotive flow simulations, thermal analysis, meshing, solver setup, and numerical validation. My other project work includes a feasibility study on converting a Trent 1000 turbofan into a gas turbine power plant.

Experience

Work history, roles, and key accomplishments

NESPAK logoNE
Current

PEC Trainee Mechanical Engineer (HVAC)

NESPAK

Jan 2026 - Present (10 months)

Assisted in rehabilitation and commissioning of chiller-based HVAC systems and VRF systems, gaining exposure to centralized and decentralized HVAC domains. Participated in site inspections, installation monitoring, and review of mechanical drawings and BOQs.

SS

Graduate Trainee Engineer

Satellite Control and Automation Services

Mar 2025 - Dec 2025 (9 months)

Supported HVAC system design for a hospital, including load calculations, ducting and piping layouts, and equipment selection. Assisted in installation activities and gained practical exposure to AHUs, ducting, piping, and ventilation systems.

HVAC Design
Load Calculations
Ducting
Piping
AHUs
Ventilation
Site Supervision
NA

Course Training: Advanced CFD Analysis

NASTP

Nov 2024 - Feb 2025 (3 months)

Completed advanced CFD training integrated with fluid mechanics, heat transfer, and solid mechanics. Performed aerospace and automotive flow simulations and thermal analyses, with proficiency in meshing, boundary conditions, and solver setup.

CFDsAnsys
Meshing
Turbulent Flow Analysis
Heat TransferFluid Mechanics
Solid Mechanics
Amal Academy logoAA

Career-Prep Fellow

Amal Academy

Aug 2023 - Oct 2023 (2 months)

Invested 150 hours in developing business skills such as communication, leadership, problem solving, and teamwork to make a deeper impact on job and education startup.

NC

Internship

NCNDT

Jul 2023 - Aug 2023 (1 month)

Applied concepts from machine design, strength of materials, and manufacturing processes during exposure to mechanical equipment design and fabrication workflows. Assisted in inspection, documentation, and component evaluation.

Machine Design
Strength Of Materials
Manufacturing ProcessesInspectionsDocumentation

Education

Degrees, certifications, and relevant coursework

Udemy logoUD

Udemy

Mastering ANSYS CFD, CFD Analysis

2025 - 2025

Completed a course on Mastering ANSYS CFD.

NA

NASTP

Course Training: Advanced CFD Analysis, CFD Analysis

2024 - 2025

Completed advanced CFD training integrated with Fluid Mechanics, Heat Transfer, and Solid Mechanics, including aerospace and automotive flow simulations.

Udemy logoUD

Udemy

Piping Design Engineering and Piping Isometrics, Piping Design

2024 - 2024

Certified in Piping Design Engineering and Piping Isometrics.

Air University logoAU

Air University

BE Mechanical Engineering, Mechanical Engineering

2020 - 2024

Grade: 3.28/4

Pursued a Bachelor of Engineering in Mechanical Engineering, achieving a final grade of 3.28/4.

Amal Academy logoAA

Amal Academy

Career-Prep Fellow, Business Skills

2023 - 2023

Career-prep fellowship investing 150 hours in developing business skills like communication, leadership, problem solving, and teamwork.

NC

NCNDT

Internship, Mechanical Engineering

2023 - 2023

Internship applying concepts from Machine Design, Strength of Materials, and Manufacturing Processes to mechanical equipment design and fabrication workflows.

Udemy logoUD

Udemy

The Fundamentals of Pressure Vessel Design in Accordance with ASME Section VIII-Div1, Pressure Vessel Design

2023 - 2023

Completed a course on The Fundamentals of Pressure Vessel Design in Accordance with ASME Section VIII-Div1.

Tech stack

Software and tools used professionally

Availability

Looking for a job

Location

Germany

Authorized to work in

Salary expectations

60k+ USD

Job categories

Interested in hiring hamzaali?

You can contact hamzaali and 600K+ other talented remote workers on Himalayas.

Message hamzaali

People also viewed

View all talent

Get matched with your dream remote job

Sign up now and join over 1,000,000+ remote workers who receive personalized job alerts, curated job matches, and more for free!

Sign up
Himalayas profile for an example user named Frankie Sullivan