At Torrent Power, I lead quality assurance and inspection for distribution equipment, checking transformers, compact substations, MV switchgear, and other equipment against IS/IEC standards and project requirements. I’ve also reviewed and approved more than 200 vendor drawings, BOQs, and datasheets.
I led a Lean Six Sigma initiative with major OEMs to address RMU subcomponent failures, reducing customer complaints by 55% over three years. I also built and ran an FMEA, DMAIC, and 5-Why programme across more than 20 equipment categories, reducing non-conformances by 24%.
For field operations, I introduced disconnecting terminal blocks with CT shorting links so protection relay replacement could happen without planned outages. I also redesigned a compact substation layout for single-side access and proposed an RC-snubber mitigation after identifying high-frequency transients as the cause of recurring dry-type transformer failures.
My work also covers distribution network analysis, solar PV DCR compliance, and BESS electrical QA/QC. I supported development of an Electronic Fuse Monitoring relay that provides fuse-blown status through SCADA, and prepare technical information for MYT filings and True-Up reports aligned with CEA and GERC requirements.

