Skip to main content
LUIS FERNANDO GRANADOS BORJALB
Looking for a job

LUIS FERNANDO GRANADOS BORJA

@luisfernandogranados

Mechanical Engineer at ABC INGEGNERIA on mining projects, analyzing slurry-pumping systems and preparing engineering documents.

Peru
Message

At ABC INGEGNERIA - COMPANIA MINERA CONDESTABLE, I prepare and update engineering documents for a tailings filtration plant and analyze pumping systems with AFT Fathom and AFT Impulse. I also develop piping flexibility analyses for slurry-pumping stations and press-filter systems.

At SEPCON - REPSOL, I developed and reviewed mechanical engineering for piping systems and associated equipment. I assessed equipment documentation, designed supports for spools and structures, and selected pumps for hydrocarbon transport systems.

At PERU LNG – Gas de Camisea, I developed mechanical engineering for piping systems, support structures, and equipment, including stress and load analyses with CAESAR II. Earlier, at the Planta de Oxígeno Médico, I supervised mechanical equipment installation, commissioning, and operation.

Experience

Work history, roles, and key accomplishments

PC

Ingeniero Mecanico de Diseno

PERU LNG – Gas de Camisea

Jan 2023 - Dec 2024 (1 year 11 months)

Developed mechanical engineering for ducting systems, support structures, and equipment, performed 3D modeling and review, prepared calculation reports and technical documentation, and conducted stress analysis using CAESAR II.

AC

Ingeniero Mecanico

ABC INGEGNERIA - COMPANIA MINERA CONDESTABLE

Jan 2026 - Present (10 months)

Elaborated and updated engineering documents, performed simulation and validation of pumping systems, developed pipe flexibility analyses, and evaluated technical offers. Generated As-Built plans and documentation for the Ministry of Energy and Mines.

AFT Fathom
AFT Impulse
ASME B31.3
APIs
Equipment Lists
Data Sheets
As Built Documentation
Technical Evaluation
SR

Ingeniero de Proyectos

SEPCON - REPSOL

Jan 2025 - Present (1 year 10 months)

Developed and reviewed mechanical engineering for piping systems and associated equipment, reviewed technical documentation, designed and optimized supports using Simsolid, generated isometric drawings and P&IDs, and issued RFIs. Tracked project progress and selected pumps for hydrocarbon transport.

SimSolid
P&ID
Isometric Drawings
RFI
Pump Selection and Sizing
NPSH
Project Control
Man Hour Tracking
SP

Ingeniero de Diseno

SEPCON - PLUSPETROL

Jan 2024 - Present (2 years 10 months)

Performed 3D routing of piping using CADWorx, coordinated with other disciplines via Navisworks, selected mechanical equipment, supervised fabrication of pipe spools, and updated As-Built documentation during commissioning.

CADWorx
Navisworks3D ModelingPiping DesignAs Built Documentation
Fabrication Supervision
HDPE
Carbon Steels
PM

Ingeniero Junior Mecanico

Planta de Oxigeno Medico

Jan 2021 - Present (5 years 10 months)

Supervised assembly, commissioning, and operation of an industrial oxygen plant, including compressor, booster, chiller, dryer, and PSA system. Selected auxiliary equipment, designed oxygen distribution piping, and developed maintenance plans.

Oxygen Plant
PSA
Compressor
Chiller
Dryer
Piping DesignMaintenance Planning
Hydraulic Drawings
Pneumatic Drawings
UU

Practicante de Ingenieria Mecanica

Union Andina de Cementos (UNACEM)

Jan 2020 - Present (6 years 10 months)

Participated in mechanical engineering activities in an industrial plant, developed structural models and FEA analysis of storage silos and rotary kilns using SolidWorks/Ansys, designed a hangar structure, and analyzed vibrations in rotating equipment.

SolidworksAnsys
FEA
Structural Design
AISC
Vibration Analysis
Rotating Equipment

Education

Degrees, certifications, and relevant coursework

Universidad Nacional Mayor de San Marcos logoUM

Universidad Nacional Mayor de San Marcos

Physics, Physics

2023 - 2023

Studied Physics at Universidad Nacional Mayor de San Marcos from March to December 2023.

Universidad Nacional del Centro del Perú logoUP

Universidad Nacional del Centro del Perú

Ingeniería Mecánica, Mechanical Engineering

2016 - 2021

Studied Mechanical Engineering at Universidad Nacional del Centro del Perú from August 2016 to August 2021.

Universidad Nacional de Ingeniería logoUI

Universidad Nacional de Ingeniería

Especialización en Ingeniería de Diseño, Design Engineering

2019 - 2019

Completed a specialization in Design Engineering at Universidad Nacional de Ingeniería from February to October 2019.

Tech stack

Software and tools used professionally

Availability

Looking for a job

Location

Peru

Authorized to work in

Salary expectations

60k+ USD

Skills

Mechanical EngineeringMechanical DesignPiping Design
Flexibility Analysis
Pump System Analysis
Equipment Selection
3D Modeling
Isometric Drawings
As Built Documentation
Mechanical Installation
Commissioning
Fabrication Supervision
Finite Element Analysis
Vibration Analysis
Project Tracking

Interested in hiring LUIS FERNANDO?

You can contact LUIS FERNANDO and 600K+ other talented remote workers on Himalayas.

Message LUIS FERNANDO

People also viewed

View all talent

Get matched with your dream remote job

Sign up now and join over 1,000,000+ remote workers who receive personalized job alerts, curated job matches, and more for free!

Sign up
Himalayas profile for an example user named Frankie Sullivan